All
Product keywords
Please enter the email address account.
JDY-10M 4.0 bluetooth Module Master-Slave Support MESH Networking App Transmission
Share to:

JDY-10M 4.0 bluetooth Module Master-Slave Support MESH Networking App Transmission

- China
104971501825581914

0 Customer Reviews | Please refer to English description
4
Save an extra for using the app

Scan the QR code to buy:

  • 1. Download our FREE app on Google play or App Store.
  • 2. Launch the app and scan the QR code to buy directly.

Follow the below steps:

  • 1. Sign in to Gearbest.com
  • 2. Add marked product(s) to your Basket.
  • 3. Open our app, and go to your Basket.
  • 4. Pay for your order for an immediate discount!
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Oct 22 - Nov 03, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free instalments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer One Year Repair Warranty Report item
Clearance
Recommended Products for You

Descriptions

Main Features

Product introduction:

The JDY-10 transmission module is a bluetooth 4 protocol standard, the working band is 2. 4GHZ range, the modulation mode is GFSK, the maximum transmission power is 8dB, the maximum transmission distance is 50 meters. It has the characteristics of low power consumption, small size, strong signal, stable data transmission and so on.
 
Product features:
 
1: supports the transmission of Android and IOS mobile phones.
2: Supports one-to-many, many-to-one, many-to-many data transmission and control.
3: Supporting network LED lamp (26 scenario mode, panel mode), brightness, white light, adjustable speed.
4: Supports networking GPIO control (one-to-many, many-to-one, many-to-many).
5: can be certified by FCC/CR and other standard.
6: Supporting networked remote control (ultra-low power consumption), two dry batteries can be used for at least one year.
7: support network 4 way PWM control.
8: The maximum number of 8: networks is 255.
9: supports broadcast and unicast MESH to send data.
10: supports BLE master-slave operation without master-slave switching.
11: at least 60% of the smart home application JDY-10M can be competent.
 

Product application scope:
 
1: bluetooth networking LED lights (one to many, many to one, mobile phone or remote control, many to many control ).
2: bluetooth network motor pulling applications (one to many, many to one, machine or remote control, many to many control).
3: network panel switch, 86 switch (ultra-low power consumption).
4: network smart home application (control, relays, curtains) control.
5: networking sensor Application of network gateway of.
6: Application of network gateway of WIFI.
7: Application of Zigbeel network.
8: Application of mobile phone network control.
 
Technical specifications:
 

TypeSpecification parameter
Working voltage1.9 - 3.6V
Working temperature-40 - 85℃
Maximum emission power+8dbm
AntennaPCB board antenna
Receiving sensitivity-92dbm
SMT welding temperature<260 degree
Communication interfaceUART
 
average current
Wake up the MESH mode28MA
Deep Sleep mode5 uA
 
Pin function description:


PinDefinitionFunctionDescription
1RESETResetLow level effective
2E50UTPUT1The output pin can be controlled by networking, and the pin level has memory function. The next time you power up, you can keep the level set before.
3H60UTPUT2The output pin can be controlled by networking, and the pin level has memory function. The next time you power up, you can keep the level set before.
4E70UTPUT3The output pin can be controlled by networking, and the pin level has memory function. The next time you power up, you can keep the level set before.
5F00UTPUT4The output pin can be controlled by networking, and the pin level has memory function. The next time you power up, you can keep the level set before.
6F1K5Key 5 input pin (key target short address can be given special attention by AT instruction: K5 pin function for IO full open / full function pin, press - down to the network all modules OUT pin output low level, then press let all chess block output level in the network, in the application can be used for one key full open, one key full off and other functions application.
7SWSDownload program pin 
8VCCPower Supply 
9GNDPower supply 
10PWM3PWMAT+CLSSA0:This pin is a common PWM function
AT+CLSSB1:This pin is controlled by the white light pin of the LED lamp
USTATConnection state pinUnconnected low level, post connection high level
12ALEDBroadcast instructionMESH working instruction pin flashes once per second and outputs 100MS high level.
13PWRCConnect the AT instructionConnection state: PWRC pin pull low, AT instruction PWRC pin pull up or suspend transmission.
Unconnected state: PWRC pins can send AT instructions in any state.
14RXD Serial port input, level TTL level
15TXD Serial output, level TTL level
16B0K1Key 1 input pin (short key address can be set by AT instruction).
17B5K2Key 2 input pin (short key address can be set by AT instruction).
18B6K3Key 3 input pin (short key address can be set by AT instruction).
19PWMOPWMAT+CLSSA0:This pin is common PWM function AT+CLSSB1: this pin is LED lamp red light pin control.
20ClK4Key 4 input pin (short key address can be set by AT instruction).
21PWM1PWMAT+CLSSA0: this pin is ordinary PWM function AT+CLSSBl: this pin is LED lamp blue light pin control.制
22PWM2PWMAT+CLSSA0: this pin is ordinary PWM function AT+CLSSB1: this pin is LED lamp green light pin control.
 
AT instruction set:
 
The user can communicate through the serial port and the bluetooth chip. The serial port uses Tx, Rx two signal lines, and the baud rate supports 48009600, 19200.38400, 57600115200. The default baud rate of the serial port is 115200bps.
Detailed description of the AT instruction set.
(Note: the AT instruction must return to the line, the AT instruction can only take effect when the module is unconnected. Once the bluetooth module is connected to the mobile phone, the bluetooth module enters the data transmission mode) only for the feature UUID: FFEI, and MFSH can communicate with the instruction via the characteristic UUID: FFE2. Of course the serial port is connected to the state. You need to issue the AT command to send the AT instruction (including the MESH instruction) by pulling the PWRC pin low.
(AT instruction is small and case sensitive, all in return, line end: rn, pay special attention to the computer serial tool hair terminator, do not need to input rn, only need to check the send back to the line.
 
Inquiry - version number:
 

InstructionResponseParameter
AT+VER+Param:Edition
Default: +JDY-10M-V2.1-MESH
 
Check - bluetooth MAC address:
 

InstructionResponseParameter
AT+MAC+MAC:Param: MAC address
 
Reset - soft reset
:


InstructionResponseParameter
AT+RESET+OK 
 
Set / query - bluetooth name:
 

InstructionResponseParameter
AT+NAME+0KParam: bluetooth name
Default name: the longest 18 bytes of JDY-10M
 
Set / query - serial port baud rate:
 

InstructionResponseParameter
AT+BAUD0KParam: <0-7)
0:115200bps
1:57600bps
2:38400bps
3:19200bps
4:9600bps
5:1800bps
默认值:0
AT+BAUD+BAUD):
 
Setup / check - device type:

 

InstructionResponseParameter
AT+CLSS+OKParam: (00-FF)
A0: through mode (support 1 stroke, key switch input, OUT output)
Bl: LED lamp mode (support LED lamp, keystroke input, OUT output)
C0: low power remote control (only supporting key input)
 
Default: A0 transmission mode
AT+CLSS+CLSS=
 
Set off - disconnect connection:
 

InstructionResponseParameter
AT+DISC+0K 
 
Set up / query - Networking ID:
 

InstructionResponseParameter
AT+NETID+0KParam: (12 bytes) default: 123456789ABC
AT+NETID+NETID=< Param>
 
Set / query - short address of networking:
 

InstructionResponseParameter
AT+MADDROKParam (2 bytes)
Default: one bit after MAC address (HEX)
AT+MADDR+HADDR=
 
Setting / checking the -APP connection password:
 

InstructionResponseParameter
AT+PSS+0Kparam: (2 bytes) 
Default:12345
AT+PSS+PSS=
 
Set / check a APP cipher connection switch:
 

InstructionResponseParameter
AT + ISCENOKParam: (1 bytes)
1: hit the APP password switch
0: APP connections do not require a password
 
Default: 0
AT+ISCEN+ISCEN=
 
Set / check - the short address of the key switch:
 

InstructionResponseParameter
AT+KVALUE+0KParam: (4 bytes)
01FF: indicates that K1 is configured as a broadcast mode. When K1 is pressed, all devices will receive K1 key values.
0108: means that K1 is set to unicast. When K1 is pressed, only the device's short address is 08 of the device receiving the K1 key.
02FF: means that K2 is set to broadcast mode. When K2 is pressed, all devices will receive K2 key value.
0208: means that K2 is set to unicast. When K1 is pressed, only the device's short address is 08 of the device receiving the K2 key.
03FF: indicates that K3 is configured as a broadcast mode. When K3 is pressed, all devices will receive K3 key values.
0308: means that K3 is set to unicast. When K3 is pressed, only the device's short address is 08 of the device receiving the K3 key.
04FF: means that K4 is set to broadcast mode. When K4 is pressed, all devices will receive K4 key value.
0408: means that K4 is set to unicast. When K4 is pressed, only the device's short address is 08 of the device receiving the K4 key.
05FF: means that K5 is set to broadcast mode. When K5 is pressed, all devices will receive K5 key value.
0508: means that K5 is set to unicast. When K5 is pressed, only the device's short address is 08 of the device receiving the K5 key.
AT+KVALUE+KVALUE=Param2: (2 bytes)
01: means to read the address of the K1
02: means to read the address of the K2
03: reads the tore of K3
04: means to read the address of the K4
05: farmer reads K5's address
 
The number of serial ports MKSH is transmitted :(one to many, many to one, many to many)


instructionsTarget short circuit addressData
AAFC2byteParam

Serial MKSH data receiving:
 

instructionsTarget short circuit addressData longData
AAlBytelBytelOByte
BBlBytelBytelOByte
 
Serial port MESH function data: (one to many, many to one, many to many)
 

instructionsTarget short circuit addressData
AAFC2byteParam

I0 MESH Level control:
 

IOPort numberParamFunctionData format
OUT1
 
E7F101OUT1 Pin high levelHEX
E7F100OUT1 Pin low levelHEX
OUT2E7F201OUT2 Pin high levelHEX
E7F200OUT2 Pin low levelHEX
OUT3E7F301OUT3 Pin high levelHEX
E7F300OUT3 Pin low levelHEX
OUT4E7F401OUT4 Pin high levelHEX
E7F400OUT4 Pin low levelHEX
ALLE7FFFFOUT All for high levelHEX
E7FOOOOUT All for low levelHEX

Package included:

1 x JDY-10M 4 bluetooth Module Master-Slave Support MESH Networking App Transmission




















Specification

Type
Voltage Regulator
Condition
New
View more

You Will Also Like

Customer Reviews

0
  • 0
  • 0
  • 0
  • 0
  • 0
See all 0 reviews Write a Review

Get GB Points! Be the FIRST to Write a Review!

Sponsored Products Related to This Item
Your Recently Viewed Items

See Personalized Recommendations

New customer? Start here
Pre-sale Service