All
Product keywords
Please enter the email address account.
Original Hiland DIY Multifunction Transistor Tester Kit For LCR ESR Transistor Meter PWM Signal Generator
Share to:

Original Hiland DIY Multifunction Transistor Tester Kit For LCR ESR Transistor Meter PWM Signal Generator

- China
104971501848846313

0 Customer Reviews | Please refer to English description
10
Save an extra for using the app

Scan the QR code to buy:

  • 1. Download our FREE app on Google play or App Store.
  • 2. Launch the app and scan the QR code to buy directly.

Follow the below steps:

  • 1. Sign in to Gearbest.com
  • 2. Add marked product(s) to your Basket.
  • 3. Open our app, and go to your Basket.
  • 4. Pay for your order for an immediate discount!
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Nov 02 - Nov 14, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free instalments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer One Year Repair Warranty Report item
Clearance
Recommended Products for You

Descriptions

Main Features

DIY Meter Tester Kit For Capacitance ESR Inductance  is available now from our US  warehouse

Free shipping to US  in 3-6 business days
ship to Canada, Brazil in 7-10 days


DIY Multifunction Transistor Tester Kit For LCR ESR Transistor PWM Signal Generator M328

If you need the chip of this kit: >>>>><<<<<


Feature:

A key measurement operation , auto power off delay . Shutdown current is only 20nA, support battery operation.
Automatic detection PNP and NPN type bipolar transistors , N, P -channel MOSFET, JFET FET , diodes , two diodes, thyristors , resistors , capacitors , inductors. Automatic detection pin definitions.
Measurement of the bipolar transistor current amplification factor (B) and conduction voltage emitter junction (Uf). Darlington transistor may be identified by the amplification factor of the high threshold voltage and high current.
Can be detected inside the bipolar transistor and MOSFET protection diodes and displayed on the screen.
The threshold voltage and the MOSFET gate capacitance measurement.
Support two measuring resistors , the potential can also be measured . If the potentiometer is adjusted to its end , the tester can not distinguish the two ends of the pin and the middle.
Resistance measurement resolution is 0.1Ohm , the highest measurement value of 50MOhm.
Capacitance measurement range from 25pf to 100mF (100000UF). Resolution up to 1PF.
Can detect more than 2UF capacitor equivalent series resistance (ESR), with a resolution of 0.01Ohm. This feature is very important for the detection capacitor performance.
You can display symbols of the two diodes in the right direction , also shows the forward voltage drop.
LED detection of diode forward voltage drop higher than normal . Dual LED detected as double diodes. Simultaneous detection of light-emitting diodes will flash.
Each test time is about two seconds , only large capacitance and inductance measurements will take a long time.
New conversation function, you can select the following additional functions via the menu:
1. The square wave signal generator, optional built-in within the range of 1HZ-2MHZ stall square wave signal;
2.PWM pulse signal generator for 1-99% of the pulse width modulated signal;
3. The frequency meter function, can test 1HZ-25KHZ or higher frequency signal (in this case a slight decline in accuracy, this feature should make their own extensions)

Specification:

Measurement Range:
Resistor: 0.5Ω ~ 50MΩ
Capacitor: 30pF ~ 100mF
Inductance: 0.01MH ~ 10H
Working voltage: can use 6FF22 9V Battery, or DC 5.5V ~ 12V via DC socket
Controller: ATmega328 (has been programmed)
Standby current: 0.02uA
Operating Current: 13mA (when test current is about 18mA)

Note:

When measuring 1 uF non-polarity capacitance, attention to short-circuit capacitance between two feet and put off storage of electricity when measuring capacitance, otherwise may damage the instrument, if measuring instrument with electricity is easily to make display show CELL and can't  use normally, we are not responsible for this kind of situation, what you can do is replacing the chip, it is important to note, please!


Package included:

1 x Meter Tester DIY Kit (without the battery, not soldered)




Signal generator function




PWM pulse signal generator


 

,,,,

Specification

Type
Voltage Regulator
Condition
New
View more

You Will Also Like

Customer Reviews

0
  • 0
  • 0
  • 0
  • 0
  • 0
See all 0 reviews Write a Review

Get GB Points! Be the FIRST to Write a Review!

Sponsored Products Related to This Item
Your Recently Viewed Items

See Personalized Recommendations

New customer? Start here
Pre-sale Service