All
Product keywords
Please enter the email address account.
2.4G NRF24L01 Wireless Module Patch 120M 1.9V-3.6V 3.3V 4dBm GFSK SPI
Share to:

2.4G NRF24L01 Wireless Module Patch 120M 1.9V-3.6V 3.3V 4dBm GFSK SPI

- China
104971501872988194

0 Customer Reviews | Please refer to English description
3
Save an extra for using the app

Scan the QR code to buy:

  • 1. Download our FREE app on Google play or App Store.
  • 2. Launch the app and scan the QR code to buy directly.

Follow the below steps:

  • 1. Sign in to Gearbest.com
  • 2. Add marked product(s) to your Basket.
  • 3. Open our app, and go to your Basket.
  • 4. Pay for your order for an immediate discount!
  • FREE SHIPPING
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Oct 23 - Nov 04, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free instalments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer One Year Repair Warranty Report item
Clearance
Recommended Products for You

Descriptions

Main Features

More document click to download: 

Features:
 
This module uses the domestic RF bonding chip BK2425, which integrates all the high-speed signal processing parts related to the RF protocol. Since the link layer is fully integrated on the module, it is very easy to develop. Automatic detection and automatic retransmission of lost data packets, retransmission time and number of retransmissions can be controlled by software, automatically storing data packets that have not received the response signal; after receiving valid data, the module automatically sends a response signal without additional programming; Carrier detection - fixed frequency detection, built-in hardware CRC error detection and point-to-multipoint communication address control packet transmission error counter and carrier detection function can be used for frequency hopping setting, six channel receiving channel addresses can be set at the same time, and the receiving channel can be selectively opened. . The SPI interface of the BK2425 can be connected by the hardware SPI port of the MCU or simulated by the I/O port of the MCU. The internal FIFO can interface with various high and low speed microprocessors, which is convenient for using low-cost MCU.
 
Specifications:
 
• Onboard 2.4G PCB antenna, ISM band, SMD-8 stamp port package, compact size, easy to use for embedded applications.
• Supports six channels of data reception (one pair of six)
• Support GFSK modulation
• Supports 2Mbps/1Mbps/250Kbps data rate, and can set different transmit power
• Multi-frequency point: meet the needs of multi-point communication and frequency hopping communication, 2400MHz~2527MHz, 1MHz frequency hopping stepping
• Internally integrated high PSRR LDO
• Wide supply voltage range: 1.9~3.6V, typical 3.3V
• Average emission current as low as 18mA (4dBm)
• Receive sensitivity: -96dBm@250kbps
• Transmit power: 4dBm
• Four-wire SPI interface with speed up to 8MHz
• Internal packet processing engine
• Transceiver data hardware interrupt output
• Operating temperature: -20 ° C ~ 85 ° C
• Transmission distance: less than 120 meters (250kbp open environment without shielding without electromagnetic interference) The reliable distance is recommended to be used within 30%-50%.
 
Note:
 
1. The VCC pin voltage range is between 2.0V and 3.6V. It cannot be outside this range. If it exceeds 3.6V, the module will be burned. The recommended voltage is around 3.3V. In addition to the power supply VCC and ground, the other pins can be directly connected to the normal 5V MCU IO port without level shifting.
2. When connecting with P0 port of 51 series MCU, it is necessary to add 10K pull-up resistor, and it is not required to connect with other ports. For other series of single-chip microcomputers, if it is 5V, please refer to the output current of the IO port of this series of microcontrollers. If it exceeds 10mA, it needs to be divided by series resistors, otherwise it will easily burn the module! If it is 3.3V, it can directly connect with the IO port of nRF24l01 module. Wire connection, such as AVR series MCU. The module's SPI rate can be up to 8M, and it is generally recommended to use an SPI rate of 1M or hundreds of K.
 
Package Included:
 
 1 x 2.4G NRF24L01 Wireless Module











Specification

Type
Voltage Regulator
Condition
New
View more

You Will Also Like

Customer Reviews

0
  • 0
  • 0
  • 0
  • 0
  • 0
See all 0 reviews Write a Review

Get GB Points! Be the FIRST to Write a Review!

Sponsored Products Related to This Item
Your Recently Viewed Items

See Personalized Recommendations

New customer? Start here
Pre-sale Service