Product keywords
Please enter the email address account.
Happymodel Snapper 7 Brushless Whoop Aircraft BNF Micro 75mm FPV Racer Quadcopter 4 in 1 Crazybee F3 FC Frsky RX 700TVL Camera VTX
Share to:

Happymodel Snapper 7 Brushless Whoop Aircraft BNF Micro 75mm FPV Racer Quadcopter 4 in 1 Crazybee F3 FC Frsky RX 700TVL Camera VTX

- Red Flysky

5 1 Customer Reviews | Please refer to English description
    COD This product supports COD on delivery. Suggestions: Do not place orders with non-COD products, otherwise you will not be able to choose COD payment method.
    Ship between: Aug 13 - Aug 15, Estimated Shipping Time: business days Order Processing Time may require a few days. Once dispatched from warehouse, Shipping (or Delivery) Time depends on the Shipping Method.
  • +
  • interest-free You can enjoy a maximum of 0 interest-free instalments, and may not enjoy this offer when placing orders with other products
Tax Info Price Protection Price Disclaimer One Year Repair Warranty Report item
Recommended Products for You
Customers Who Bought This Item Also Bought

Happymodel Snapper 7 Brushless Aircraft Quadcopter Descriptions

Happymodel Snapper 7 75mm Crazybee F3 OSD 5A BL_S ESC 1S Brushless Whoop FPV Racing Drone BNF
Notice: FrSky LBT EU Firmware D16 Transmitter can not compatible with FrSky version drone.
You can change your transmitter to LBT EU Firmware D8 version or International version.
Crazybee F3 Flight Controller:
Item Name: Crazybee F3 FC
MCU: STM32F303CCT6 ( 72MHZ, 256K FLASH )
Sensor: MPU - 6000 ( SPI connection )
Power supply: 1S battery input ( DC 3.5 - 4.35V )
Built - in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built - in Frsky receiver Or Flysky Receiver
Built - in Betaflight OSD ( SPI Control )
Built - in Current meter ( Max 14A, could be modified to 28A by replace resistor )
Built - in 5V 0.8A BEC with LC filter
Built - in voltage detection
BLHELI_S pass - through Ready
Firmware: Betaflight_3.3.0_Crazybee
Board size: 28.5 x 28.5MM
Board weight: 3.5 g
Heading LED Ready
Onboard 5A 4 In 1 ESC:
Power supply: 1S LiPo / LiPo HV ( 4.2v / 4.35v )
Current: 5A continuous peak 6A ( 3 seconds )
Support BLHeliSuite programmable
Factory firmware: O_L_5_REV16_6.HEX
Motor connector: JST PH1.25 3pin
Signal Support: Dshot150 / Dshot300 / Dshot600 / Oneshot125 / Multishot / PWM
Onboard Frsky Receiver Version ( Optional ):
SPI BUS receiver
Frsky D8
Compatible both of Non EU and EU LBT transmitter
Channels: 8CH
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground ) : 300m
Onboard Flysky Receiver Version ( Optional ):
SPI BUS receiver
Protocol: AFHDS and AFHDS - 2A Switchable
Channels: 8ch ( AFHDS ) or 14ch ( AFHDS - 2A )
No ground interference ( Transmitter and receiver 1 m from the ground ): 300m
Failsafe support
SE0703 19000KV Motor :
Model: SE0802
KV: 19000KV
Stator Diameter: 7mm
Stator Length: 3mm
No.of Cells: 1S Lipo
40mm 3 - blade Propeller ( 4 CW + 4 CCW)
5.8G VTX AIO Camera :
5.8G 48CH 25mW VTX
Output Power: 25mW
Frequency: 48CH
With Raceband: 5474 - 5945 MHZ
Input Voltage: 3.3V - 5.5V
Current Consumption: 300mA ( type )
700TVL Camera
Camera Resolution: 700TVL
Field of View: 120°
Video Format: NTSC
Antenna: RG178 antenna
3.8V 450mAh Lipo Battery:
Capacity: 450mAh
Voltage: 3.8V
Continuous Discharge Rate: 30C
Instantaneous Discharge Rate: 60C
Connector: PH2.0
- Betaflight support, multi flight mode: ACRO / AIR / ANGLE
- Powerful Brushless motor and Smooth ESC
- CNC aluminum alloy propeller guard
- Betaflight OSD support, easy to get RSSI, Voltage and other info from your goggles
- Adjust the settings and the PID of the flight controller via OSD
- Frsky version support both EU LBT and NON-EU Frsky transmitter
- Full telemetry function ready
- Head lights ready
- Camera angle adjustable
- Real Bind and Fly version


Dimensions and Weight

Product weight: 0.0270 kg
Package weight: 0.1550 kg

Package Contents

Package Contents: 1 x Snapper7 75mm FPV Drone, 4 x 40mm 3 - Blade Propellers ( 4 CW and 4 CCW ), 1 x 3.8v 450mah 30C / 60C Lipo battery, 1 x USB Lipo / LIHV Charger, 1 x Propeller Disassemble Tool, 1 x Screwdriver

You Will Also Like

Customer Reviews

5 out of 5
  • 1
  • 0
  • 0
  • 0
  • 0
See all 1 reviews Write a Review
  • Nick
    Yes (0) Color: Red Size: Flysky
    Happymodel Snapper 7
    Great price, fast shipping, fast delivery to your doorstep. Sent Whoop receiver Frsky instead of FlySky, after a short correspondence acknowledged the error and returned the cost of the order. Very good and honest seller, recommend.

    Jul 19,2019

Customer Questions & Answers

  • All
  • Product Information
  • Stock Status
  • Payment
  • About Shipping
  • Others

Be the FIRST to Ask a Question. Want GB Points? Just Write a Review!

0 Questions & Answers View All >

Sponsored Products Related to This Item


There are two key factors which will affect the time you receive your items.

Item processing time
After receiving your order,we require some time to test the product to ensure its quality.The exact processing time varies depending on the item.The average processing time is 3 working days.but this can also be affected by the item's stock status. For small quantity orders,the processing time is 1-3days while larger quantity orders may require 2-5days.
Shipping methods
China Warehouse:
Shipping Type Country or Region Arrive within 1-7 Days Arrive within 8-15 Days Arrive within 16-30 Days Arrive within 31-45 Days Average Time (Days)
Unregistered Air Mail or Registered Air Mail United States 0.52% 23.78% 69.62% 5.87% 25.63
Spain, United Kingdom, Italy, Germany, France & Portugal 1.58% 35.8% 56.84% 5.57% 26.39
Netherlands, Greece, Poland, Hungary, Slovakia, Czech Republic 5.59% 24.44% 55.84% 13.00% 27
Russia 0% 0.04% 64.94% 30.02% 39.53
Japan, Korea 0% 21.30% 68.80% 9.66% 23
Brazil 0% 0% 23.91% 72.09% 38.6
Thailand, Singapore & Malaysia 0% 18.38% 54.27% 25.34% 19.03
Other countries 0.7% 38.79% 47.94% 8.56% 23.57
Priority Line United States 0.43% 33.18% 65.07% 0.5% 16.43
Spain, United Kingdom, Italy, Germany, France & Portugal 2.55% 18.21% 35.65% 34.27% 26.31
Russia 0% 0% 32.6% 65.4% 36.07
Australia 7.67% 86.60% 5.68% 0% 11
Korea 35.54% 44.45% 19.32% 0% 11.65
Japan 95.80% 2.09% 0% 0% 6.84
Thailand, Singapore & Malaysia 58.96% 41.04% 0% 0% 8.45
Other countries 22.33% 30.8% 27.62% 17.64% 18.65
Expedited Shipping ALL countries(EMS) 3.8% 46.8% 26% 15% 14.8
ALL countries(DHL) 65.8% 25.75% 3.86% 0.37% 6.72
GW Warehouse: Typically 3-5 days to the UK, 3-7days to other European countries.
USA Warehouse:Generally, 3-7 days to a USA address.
ES Warehouse:Generally, 2-5 days to the Spain ,3-7 days to the Portugal.
Shipping from warehouse nearest to shipping address is faster. Additional charges may apply.
Note:This is a general guide and delays maybe caused force majeure, natural disasters, inclement weather, war, public holidays, and factors outside our control.

Payment accepts PayPal,Credit Cards,Wire Transfer and Westem Union as secure payment methods.

The most convenient payment method in the world.
Wire transfer
For orders which exceed $1,500,please contact us at
Note: please email us the order number,the amount transferred along with currency type,and the exact date of the wire transfer.
Western Union
Please contact us at for details.
Note: please email us the following information after you have paid via Westem Union:
· Control Number(10 digits)
· The exact amount sent along with the currency
· Name of sender.
· Address of sender

Do you want to bulk buy Happymodel Snapper 7 Brushless Aircraft Quadcopter ? Please submit your wholesale Happymodel Snapper 7 Brushless Aircraft Quadcopter inquiry below. Please note we usually don’t offer free shipping on wholesale Happymodel Snapper 7 Brushless Aircraft Quadcopter orders, but the wholesale price will be a big bargain.

Your Recently Viewed Items

See Personalized Recommendations

New customer? Start here
Pre-sale Service